验证手机自动送彩金59

Home > Products > Industrial Control And Protection Products
WPX3 AC Contactor

WPX3 AC Contactor

WPX3 series AC Contactor is suitable for using in the circuits of rated voltage up to 660V AC 50Hz or 60Hz, rated current up to 95A, for making, breaking, frequently starting & controlling the AC motor. Combined with the auxiliary contact block, timer delay & machine-interlocking device etc, it becomes the delay contactor, mechanical interlocking contactor, star-delta starter. With the thermal relay, it is combined into the electromagnetic starter. The Contactor is producedaccording to IEC 60947-4.


CJX2 Contactor

CJX2 Contactor

CJX2 series AC Contactor is suitable for using in the circuits of rated voltage up to 660V AC 50Hz or 60Hz, rated current up to 95A, for making, breaking, frequently starting & controlling the AC motor. Combined with the auxiliary contact block, timer delay & machine-interlocking device etc, it becomes the delay contactor, mechanical interlocking contactor, star-delta starter. With the thermal relay, it is combined into the electromagnetic starter. The Contactor is producedaccording to IEC 60947-4.

CJX2N AC Contactor

CJX2N AC Contactor

CJX2N series AC contactor is suitable for frequency 50/60Hz, rated insulation voltage up to 1000V, rated operation current 9~150A under AC~3 duty. It is mainly used for making/breaking electric circuits at a long distance & for frequent starting/stopping & controlling AC Motors. It is used in combination with thermal relay to compose a magnetic motor starter. The products comply with IEC60947-4-1 standard.

CJX2-F AC Contactor

CJX2-F AC Contactor

CJX2-F series AC Contactor is applied to the circuit rated voltage up to 1000V AC. 50/60Hz,rated current up to 780A, for long distance breaking circuit and frequently starting or controlling the motor. It also can be used for the control of distributing circuits of rated current from 200A to 1600A(AC-1)/115A to 780A(AC-3).The products comply with IEC60947-4.

CJX2-E AC Contactor

CJX2-E AC Contactor

CJX2-E series AC Contactor (contactor for short), is mainly used in circuit of AC 50Hz or 60Hz, rated voltage to 660v and below, DC voltage to 220v and below, or in circuit of AC-3 type, 380V operating voltage, rated current to 9A.

CJX2-K AC Contactor

CJX2-K AC Contactor

CJX2-K series AC Contactor is suitable for using in the circuits the rated voltage up to 660V AC 50Hz or 60Hz, rated current up to 12A in AC-3 using category , for making & breaking, frequently starting & controlling the AC motor. Combine with the auxiliary contact block, timer delay & machine- interlocking device etc, it becomes the delay contactor,mechanical interlocking contactor, star-delta starter. With the thermal relay, it is combined into the electromagnetic starter. The contactor is produced according to IEC 60947-4.

WP1-R2 Thermal Relay

WP1-R2 Thermal Relay

WP1-R2 series thermal overload relay are suitable for overload and phase-failure protection of AC motors with frequency of 50/60Hz, voltage up to 690V, current up to 0.1-150A under 8-hours duty or uninterrupted duty.
Functions provided by these relays, are phase-failure protection, ON/OFF indication, temperature compensation, and manual/automatic reset.
Applicable Standard:IEC 60947-4-1
The relays can be mounted onto contactors or installed as single units.

WPCH6 Modular AC Contactor

WPCH6 Modular AC Contactor

WPCH6 series modular AC contactor is suitable for using in the circuits the rated voltage up to 400V AC 50Hz or 60Hz and rated current up to 63A to control household electrical appliances or similar components. And it also can be used to control household motor by decreasing the power.
Application: House, hotel, apartment etc. to achieve automatic feature. It's applied in mass produced household electrical appliances.
Standards: GB17885, IEC61095

CJX2-Z DC Contactor

CJX2-Z DC Contactor

CJX2-Z series DC operated contactor is suitable for use in the circuits up to rated voltage 660V DC 50Hz or 60Hz, and in rated current 9-95A in DC-3/380V load circuits. For remote controlling circuit making, breaking and frequent starting DC motors. It can also combine with the auxiliary contact group, air delayer, thermal relay devices etc.

CJX2-N Mechanical Interlocking Contactor
CJ19 Changeover Capacitor AC Contactor

CJ19 Changeover Capacitor AC Contactor

CJ19C series AC Contactor is suitable for using in the circuits the rated voltage up to 380V AC 50Hz or 60Hz.CJ19C is used to combine with low voltage reactive power compensators or cut offlow voltage shunt capacitor. CJ19C series AC Contactor has restraining device to effectively decrease impact caused by inrush transient current when switch on or over voltage when switch off.

JR28 Thermal Relay

JR28 Thermal Relay

JR28 series thermal overload relay are suitable for overload and phase-failure protection of AC motors with frequency of 50/60Hz, voltage up to 690V, current up to 0.1-150A under 8-hours duty or uninterrupted duty.
Functions provided by these relays, are phase-failure protection, ON/OFF indication, temperature compensation, and manual/automatic reset.
Applicable Standard: GB 14048.
International Standard: IEC 60947-4-1
The relays can be mounted onto contactors or installed as single units.

JR28N Thermal Relay

JR28N Thermal Relay

JR28N series thermal relay is suitable for using in the circuits rated voltage up to 660V, rated current 93A AC 50/60Hz, for over-current protection of AC motor. The relay has the differential mechanism and temperature compensation and can plug in CJX2N series AC contactor. The product conforms to IEC 60947-4-1 standard.

LE1

LE1

LE1 Magnetic starter is suitable for using in the circuits the rated voltage up to 690V AC 50Hz or 60Hz.With AC-3 type,LE1 is used for starting or halting of three-phase squirrel case electromotor which rated working voltage is 380V and rated working current is from 9A to 95A. Combining with matchable thermal relay can protect the motor from overload and phase failure.

SSR-1
SSR

SSR


SSR-3 032 38□Z & SSR-3 A38□Z
SSR-H3100ZF & SSR-H3200ZF
BZ142-A

BZ142-A

This hour meter is mechanical type. Widely applied in all kinds of machine, equipment and device(such as environmental protection equipment generator etc). Used for to demonstrate the machine, equipment, device operating time accumulation. This mechanical type accumulation longest accumulation time can be 11 years. It also can maintain the data after the power cut.

TP8A16
Total: 40 records; Every page display: 20 records; Current: 1 / 2 pages;   Go Prev Next