验证手机自动送彩金59

Home > Products > Distribution Apparatus

WP1-V2 Motor Starter

WP1-V2 series AC Motor Starter is suitable for circuits the alternating voltage up to 690V, current up to 80A. The product works to control the overload, phase loss, short circuit protection and infrequent starts of a three-phase squirrel cage asynchronous motor. The Motor Starter can protect the distributing line for infrequent load transfer, and it can also works as an isolator.

WPHGL-63~3150A

WPHGL-63~3150A

AC 50Hz, rated voltage 660V, DC rated voltage 440V, rated current 3150A. It is used for making and breaking circuit frequently.

WPHGLZ1-125~3150A

WPHGLZ1-125~3150A

1. WPLZ1-125-3150A is suitable for switching two low-voltage circuits or transforming and safely isolating two load devices
2. Operating mode:
Direct operate: handle is installed on the switch
3. 3P,4P(3P+breakable neutral pole)
4. It can be used for outside-cabinet operation with long axis
5. Two auxiliary contacts can be installed if needed
6. Electrical performance and mechanical performance is as same as WPHGL-125-3150A correspondingly
7. Provide bridge type connecting conductors connected with outputterminal or input terminal of switch
PS: when using bridge type connection, please instruct if it applies to the line end or the outlet end

WPW1-2000~6300 Intelligent Air Circuit Breakers

WPW1-2000~6300 Intelligent Air Circuit Breakers

WPW1 series intelligent air circuit breakers (hereinafter called ACB) are applied for the network circuit of AC 50Hz, rated voltage 400V, 690V and rated current between 630A and 6300A. Mainly used for distributing energy and protecting the circuit and power supply device against short-circuit, undervoltage, single-phase ground fault, etc. The ACB has intelligent protection function and the key parts adopt intelligent release. The release can make the accurate selective protection, which can avoid cutting off the power and improve the reliability of power supply.
The products conform with IEC60947-1,IEC60947-2 standards.

WPQ2 ATS

WPQ2 ATS

WPQ2 series automatic transfer switch is the best development of the company generation products. Mostly used to monitor the power supply circuits. When main power failured, it will change over to backup power by automatically, thus completing the transformation of power system . At present, in particular suited for the important electricity power places where disallow to failure, in order to meet the needs of the scene. Automatic switch has self-input and self-recover,self-input without self-recover, utility to utility, utility-generators work with variety functions, the product applied in 220V,AC 50Hz,rated current from 10A to 1250A (CB class) automatically switch products.

WPS1 Automatic Transfer Switch

WPS1 Automatic Transfer Switch

1. Adopt the double row type composite contact,side pull institutions, micro motor prestore and microelectronics control technology, come true zero flashover (no arcing chamber).
2. Reliable electrical and mechanical interlocking chain, the implement of the components indepen dently with islation switch, the use of safe and reliable.
3. Using over zero technology, the state of emergency can be enforced under the zero(cut down the 2 ways in the meanwhile) to meet the needs of fire fighting.
4. Executive load isolation switch using a single motor-driven, transfer reliable smooth, no noise, little impact.
5. Operators drive only in the implementation of the electrical load isolation by switching transient current, steady work without providing current, energy-saving significantly.
6. Executive load disconnector chain with a mechanical device used to ensure that reliable standby power of non-interference in each other.
7. Obvious off position indicator, padlocks and other functions, high reliability and service life of more than 8000 times.
8. Mechatronics design, switching conversion accurate, flexible, smooth and adopt international advanced logic control technology, anti-interferencecapability, without external interference.
9. Cooperation with the main power on and standby power off, or the main power off and standby on, the main power and standby power are both off, three kinds stability working. (I-O-II)
10.Easy installation, the control circuit return way adopt the connect and insert terminal connector.
11.Four operator models: emergency manual operation, electric remote control operation, emergency disconnected operation under the automatic stating, automatic control operations.

WPV9-25 Motor Protect Circuit Breaker

WPV9-25 Motor Protect Circuit Breaker

WPV9-25 series AC Motor Starter is suitable for circuits the alternating voltage up to 690V, current up to 80A. The product works to control the overload, phase loss, short circuit protection and infrequent starts of a three-phase squirrel cage asynchronous motor. The Motor Starter can protect the distributing line for infrequent load transfer, and it can also works as an isolator.

GV2&GV3 Motor Starter

GV2&GV3 Motor Starter

GV2&GV3 series AC Motor Starter is suitable for circuits the alternating voltage up to 690V, current up to 80A. The product works to control the overload, phase loss, short circuit protection and infrequent starts of a three-phase squirrel cage asynchronous motor. The Motor Starter can protect the distributing line for infrequent load transfer, and it can also works as an isolator.

WPM9 Series Moulded Case Circuit Breaker

WPM9 Series Moulded Case Circuit Breaker

WPM9 Series circuit breakers is new generation breaker.It isapplied for the distribution network of AC 50 Hz, rated insulation voltage 690V, rated working voltage up to 690V, rated cuurent up to 800A. It can distribute power, protect the circuit and power supply devices from the damage of overload, short circuit and under voltage, etc.
This series circuit breaker feature small volume, high breaking capacity and short arcing. It can be installed vertically (namely vertical installation) and also installed horizontally (namely horizontal installation).
It complies with standards of IEC60947-2.

WPM9RE Electronic Adjustable MCCB

WPM9RE Electronic Adjustable MCCB

WPM9RE Series circuit breakers is new generation electronic adjustable breaker.It isapplied for the distribution network of AC 50 Hz, rated insulation voltage 690V, rated working voltage up to 690V, rated cuurent up to 800A. It can distribute power, protect the circuit and power supply devices from the damage of overload, short circuit and under voltage, etc.

WPM9T/A, WPM9RT Thermal Magnetic Adjustable Circuit Breaker

WPM9T/A, WPM9RT Thermal Magnetic Adjustable Circuit Breaker

WPM9T/A, WPM9RT Series circuit breakers is new generation thermal magnetic adjustable breaker.It isapplied for the distribution network of AC 50 Hz, rated insulation voltage 690V, rated working voltage up to 690V, rated cuurent up to 800A. It can distribute power, protect the circuit and power supply devices from the damage of overload, short circuit and under voltage, etc.

WPM6 Series Moulded Case Circuit Breaker

WPM6 Series Moulded Case Circuit Breaker

WPM6 Series circuit breakers were developed according to the demand of domestic and international market as well as features of similar products.
Its rated insulation voltage up to 1000V, is suitable for AC 50Hz distribution network circuit whose rated operation voltage is up to 690V, rated operation current from 10A to 800A. It can distribute power, protect the circuit and power supply devices from the damage of overload, short circuit and under voltage, etc.
This series circuit breaker feature small volume, high breaking capacity and short arcing. It can be installed vertically (namely vertical installation) and also installed horizontally (namely horizontal installation).
It complies with standards of IEC60947-2.

WPM6E Series Intelligent Electronic Adjustable MCCB

WPM6E Series Intelligent Electronic Adjustable MCCB

WPM6E Series circuit breakers is suitable for AC 50Hz, rated insulation voltage up to 1000V, rated operation current from 16A to 800A distribution network.

WPM1 Moulded Case Circuit Breaker

WPM1 Moulded Case Circuit Breaker

WPM1 series moulded case circuit breaker(herein after called circuit breaker)is one of our new type circuit breakers, which adopts international advanced design and manufactural technology, it can be divided into L-type (standard type), M-type (higher breaking type), H-type (current limiting type) according to the rated ultimate short circuit breaking capacity (Icu). With the features of small and compact, high breaking capacity, short arcing-over distance, anti-vibration, the circuit breaker is used popularly on land and marine products, they are applied for the power distribution network of AC 50Hz,rated insulation voltage 800V (WPM1-63 to 500V), rated working voltage 690V(WPM1-63 to 400V) and below, rated current up to 1600A, it can be used to distribute electric power and protect power equipment against overload, short circuit, undervoltage etc, It also takes protective effect when motors infrequently start and protecting against overload, short circuit and lacking voltage. In the series, frame ranging from 63-630A three-pole product also comes with a transparent cover, it is convenient for customer to observe the product operation.
The circuit breaker can be installed vertically, or horizontally. This product complies with standard of IEC60947-2, GB14048.2.

Total: 14 records; Every page display: 20 records; Current: 1 / 1 pages;   Go Prev Next